-- *****************************************************************
-- CISCO-IP-IF-MIB.my
--
-- September 2002, Jayakumar Kadirvelu
--
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--CISCO-IP-IF-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPEFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
RowStatus,TEXTUAL-CONVENTIONFROM SNMPv2-TC
InetAddressPrefixLength,InetAddressType,InetAddressFROM INET-ADDRESS-MIB
InterfaceIndexFROM IF-MIB;ciscoIPIfMIB MODULE-IDENTITYLAST-UPDATED"200210120000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wbu@cisco.com"DESCRIPTION"The MIB module for configuring IP characteristics
of the interfaces of a device."REVISION"200210120000Z"DESCRIPTION"Added ciiIPIfAddressTable.
Added ciiIPIfAddressChangeNotify notification.
Deprecated ciscoIPIfMIBCompliance and added
ciscoIPIfMIBCompliance1.
Added ciscoIPIfAddressConfigurationGroup3,
ciscoIPIfAddressConfigurationGroup4,
ciscoIPIfNotificationGroup.
Added IpAddressCatagory TC."REVISION"200210100000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 309}ciscoIPIfMIBNotifs OBJECTIDENTIFIER::={ ciscoIPIfMIB 0}
ciscoIPIfMIBObjects OBJECTIDENTIFIER::={ ciscoIPIfMIB 1}ciscoIPIfMIBConform OBJECTIDENTIFIER::={ ciscoIPIfMIB 2}ciiIPAddressConfiguration OBJECTIDENTIFIER::={ ciscoIPIfMIBObjects 1}ciiIPIfNotifications OBJECTIDENTIFIER::={ ciscoIPIfMIBNotifs 0}-- Textual Conventions
--IpAddressCatagory ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Represents the IP address category.
single(1) - Indicates that the IP addressing
information for this interface,
has no primary/secondary category.
primary(2) - Indicates that this interface
provides primary IP addressing
information.
secondary(3) - Indicates that this interface
provides a secondary IP
addressing information. There
may be more than one seconday
IP addressing information for
an interface. "SYNTAXINTEGER{single(1),primary(2),secondary(3)}--
-- IP Address Configuration objects
--ciiIPAddressCategoryCap OBJECT-TYPESYNTAXBITS{ single(0), primary(1), secondary(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates what types of IP address category can
be configured on this device.
single(0) means that each interface on the device can be
assigned only one IP address.
primary(1) means that each interface on the device can be
assigned an IP address as the primary one.
secondary(2) means that each interface on the device can be
assigned an IP address as the secondary one.
Devices which has the single(0) bit set to 1, should have
the primary(1) and secondary(2) bits set to 0.
Likewise devices which have the primary(1) and/or
secondary(2) bits set to 1, should have the single(0)
set to 0."::={ ciiIPAddressConfiguration 1}ciiIPAddressTable OBJECT-TYPESYNTAXSEQUENCEOF CiiIPAddressEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The table of addressing information relevant to
this entity's IP addresses. This is the enhancement of
the ipAddrTable in IP-MIB."REFERENCE"RFC 2011"::={ ciiIPAddressConfiguration 2}ciiIPAddressEntry OBJECT-TYPESYNTAX CiiIPAddressEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The addressing information for one of this
entity's IP addresses.
The only way an entry can be created is by setting the
ciiIPAddressStatus object to 'create and go' and the
only way an entry can be destroyed is by setting the
ciiIPAddressStatus object to 'destroy'.
Any column in the entry may be modified anytime,
when the value of ciiIPAddressStatus is 'active'."INDEX{ ciiIPAddressType, ciiIPAddress }::={ ciiIPAddressTable 1}
CiiIPAddressEntry ::=SEQUENCE{
ciiIPAddressType InetAddressType,
ciiIPAddress InetAddress,
ciiIPAddressIfIndex InterfaceIndex,
ciiIPAddressPrefixLength InetAddressPrefixLength,
ciiIPAddressBroadcast InetAddress,
ciiIPAddressCategory IpAddressCatagory,
ciiIPAddressStatus RowStatus
}ciiIPAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The type of Internet address for all the objects with SYNTAX
InetAddress and InetAddressPrefixLength in this entry."::={ ciiIPAddressEntry 1}ciiIPAddress OBJECT-TYPESYNTAXInetAddress(SIZE(1..36))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The IP address to which this entry's addressing
information pertains."::={ ciiIPAddressEntry 2}ciiIPAddressIfIndex OBJECT-TYPESYNTAXInterfaceIndexMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The index value which uniquely identifies the
interface to which this entry is applicable.
ciiIPAddressIfIndex is the same as the ifIndex of the
interface associated with this ciiIPAddressEntry."::={ ciiIPAddressEntry 3}ciiIPAddressPrefixLength OBJECT-TYPESYNTAXInetAddressPrefixLengthMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The length of the prefix associated with the IP address
of this entry.
A value of zero causes all addresses to match.
The type of address is specified by ciiIPAddressType of
this entry."::={ ciiIPAddressEntry 4}ciiIPAddressBroadcast OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The broadcast address associated with the
IP address of this entry.
The type of address is specified by ciiIPAddressType of
this entry."::={ ciiIPAddressEntry 5}ciiIPAddressCategory OBJECT-TYPESYNTAX IpAddressCatagory
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Indicates the IP address category of this entry.
Setting of this object has to comply with the value of
ciiIPAddressCategoryCap. "::={ ciiIPAddressEntry 6}ciiIPAddressStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrent
DESCRIPTION"This object is used to manage creation and deletion of rows
in this table.
ciiIPAddressStatus must be set to 'creatAndGo' to create
an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the
value of this entry rowStatus object is 'active'.
Caution has to be taken before destroying any entry.
Example: Need to change the IP address of an interface,
which provides sole network connectivity.
This has to be done by destroying the entry and creating
a new one. The device would loose network connectivity
after the entry is destroyed. In this case, the destroy
of the old entry and the creation on the new entry
should be packed in the same PDU."::={ ciiIPAddressEntry 7}--
-- ciiIPIfAddressTable
--ciiIPIfAddressTable OBJECT-TYPESYNTAXSEQUENCEOF CiiIPIfAddressEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The table of addressing information relevant to
this entity's IP addresses. This is the enhancement of
the ipAddrTable in IP-MIB.
This table is same as ciiIPAddressTable accept
that ciiIPIfAddressIfIndex is part of the INDEX
clause.
This table is used to configure an IP address on a
interface identified by ifIndex. Each interface can be
configured with multiple IP addresses.
When requested to create/delete an entry in this
table, the agent also creates/deletes a
correspondng entry in the ipAddrTable of rfc2011.
Entries in this table are created/deleted only by
network managers. Agents will typically only allow
entries to be created on a subset of ifIndex values. "REFERENCE"RFC 2011"::={ ciiIPAddressConfiguration 3}ciiIPIfAddressEntry OBJECT-TYPESYNTAX CiiIPIfAddressEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The addressing information for one of this
entity's IP addresses.
The only way an entry can be created is by setting the
ciiIPIfAddressStatus object to 'create and go' and the
only way an entry can be destroyed is by setting the
ciiIPIfAddressStatus object to 'destroy'.
Any column in the entry may be modified anytime,
when the value of ciiIPIfAddressStatus is 'active'.
"INDEX{ ciiIPAddressIfIndex, ciiIPAddressType,
ciiIPAddress }::={ ciiIPIfAddressTable 1}
CiiIPIfAddressEntry ::=SEQUENCE{
ciiIPIfAddressPrefixLength InetAddressPrefixLength,
ciiIPIfAddressBroadcast InetAddress,
ciiIPIfAddressCategory IpAddressCatagory,
ciiIPIfAddressStatus RowStatus}ciiIPIfAddressPrefixLength OBJECT-TYPESYNTAXInetAddressPrefixLengthMAX-ACCESSread-createSTATUScurrent
DESCRIPTION"The length of the prefix associated with the IP address
of this entry.
A value of zero causes all addresses to match.
The type of address is specified by ciiIPAddressType of
this entry.
This object is same as the ciiIPAddressPrefixLength
object, and changes to one will affect the other. "::={ ciiIPIfAddressEntry 1}ciiIPIfAddressBroadcast OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The broadcast address associated with the
IP address of this entry.
The type of address is specified by ciiIPAddressType of
this entry.
This object is same as the ciiIPAddressBroadcast
object, and changes to one will affect the other. "::={ ciiIPIfAddressEntry 2}ciiIPIfAddressCategory OBJECT-TYPESYNTAX IpAddressCatagory
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Indicates the IP address category of this entry.
Setting of this object has to comply with the value of
ciiIPAddressCategoryCap.
This object is same as the ciiIPAddressCategory
object, and changes to one will affect the other. "::={ ciiIPIfAddressEntry 3}ciiIPIfAddressStatus OBJECT-TYPESYNTAXRowStatus
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to manage creation and deletion of rows
in this table.
ciiIPAddressStatus must be set to 'creatAndGo' to create
an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the
value of this entry rowStatus object is 'active'.
Caution has to be taken before destroying any entry.
Example: Need to change the IP address of an interface,
which provides sole network connectivity.
This has to be done by destroying the entry and creating
a new one. The device would loose network connectivity
after the entry is destroyed. In this case, the destroy
of the old entry and the creation on the new entry
should be packed in the same PDU."::={ ciiIPIfAddressEntry 4}-- Notifications
-- None-- ConformanceciscoIPIfMIBCompliances OBJECTIDENTIFIER::={ ciscoIPIfMIBConform 1}ciscoIPIfMIBGroups OBJECTIDENTIFIER::={ ciscoIPIfMIBConform 2}ciscoIPIfMIBCompliance MODULE-COMPLIANCESTATUSdeprecated-- superceded by ciscoIPIfMIBCompliance1DESCRIPTION"The compliance statement for the CISCO-IP-IF-MIB.
OBJECT ciiIPAddressType
SYNTAX INTEGER { ipv4(1) }
DESCRIPTION
An implementation is only required to support IPv4
addresses.
OBJECT ciiIPAddress
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
An implementation is only required to support IPv4
addresses."MODULE-- this moduleMANDATORY-GROUPS{
ciscoIPIfAddressConfigurationGroup1
}GROUP ciscoIPIfAddressConfigurationGroup2
DESCRIPTION"Implementation of this group is optional."OBJECT ciiIPAddressBroadcast
SYNTAXInetAddress(SIZE(4))MIN-ACCESSread-onlyDESCRIPTION"An implementation is only required if the value of
ciiIPAddressType in the same conceptual row is ipv4(1).
Write access is not required."OBJECT ciiIPAddressStatus
SYNTAXINTEGER{ active(1), createAndGo(4), destroy(6)}DESCRIPTION"An implementation is only required to support
three of the six enumerated values of the RowStatus
textual convention, specifically: active(1),
createAndGo(4), and destroy(6)."::={ ciscoIPIfMIBCompliances 1}ciscoIPIfMIBCompliance1 MODULE-COMPLIANCE
STATUScurrentDESCRIPTION"The compliance statement for the CISCO-IP-IF-MIB.
OBJECT ciiIPAddressType
SYNTAX INTEGER { ipv4(1) }
DESCRIPTION
An implementation is only required to support IPv4
addresses.
OBJECT ciiIPAddress
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
An implementation is only required to support IPv4
addresses. "MODULE-- this module-- MANDATORY-GROUPS {}GROUP ciscoIPIfAddressConfigurationGroup1
DESCRIPTION"Implementation of this group is optional. But in an
implementaion of this mib, either
ciscoIPIfAddressConfigGroup1 or
ciscoIPIfAddressConfigGroup3 must be
implemented. "GROUP ciscoIPIfAddressConfigurationGroup2
DESCRIPTION"Implementation of this group is optional."GROUP ciscoIPIfAddressConfigurationGroup3
DESCRIPTION"Implementation of this group is optional. But in an
implementaion of this mib, either
ciscoIPIfAddressConfigGroup1 or
ciscoIPIfAddressConfigGroup3 must be
implemented. "GROUP ciscoIPIfAddressConfigurationGroup4
DESCRIPTION"Implementation of this group is optional."OBJECT ciiIPAddressBroadcast
SYNTAXInetAddress(SIZE(4))MIN-ACCESSread-onlyDESCRIPTION
"An implementation is only required if the value of
ciiIPAddressType in the same conceptual row is ipv4(1).
Write access is not required."OBJECT ciiIPAddressStatus
SYNTAXINTEGER{ active(1), createAndGo(4), destroy(6)}DESCRIPTION"An implementation is only required to support
three of the six enumerated values of the RowStatus
textual convention, specifically: active(1),
createAndGo(4), and destroy(6)."OBJECT ciiIPIfAddressBroadcast
SYNTAXInetAddress(SIZE(4))MIN-ACCESSread-onlyDESCRIPTION"An implementation is only required if the value of
ciiIPAddressType in the same conceptual row is ipv4(1).
Write access is not required."OBJECT ciiIPIfAddressStatus
SYNTAXINTEGER{ active(1), createAndGo(4), destroy(6)}DESCRIPTION"An implementation is only required to support
three of the six enumerated values of the RowStatus
textual convention, specifically: active(1),
createAndGo(4), and destroy(6)."OBJECT ciiIPIfAddressCategory
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."::={ ciscoIPIfMIBCompliances 2}-- Units of ConformanceciscoIPIfAddressConfigurationGroup1 OBJECT-GROUPOBJECTS{
ciiIPAddressCategoryCap,
ciiIPAddressIfIndex,
ciiIPAddressPrefixLength,
ciiIPAddressCategory,
ciiIPAddressStatus
}STATUScurrentDESCRIPTION"A collection of objects for the address configuration
of interfaces."::={ ciscoIPIfMIBGroups 1}ciscoIPIfAddressConfigurationGroup2 OBJECT-GROUPOBJECTS{
ciiIPAddressBroadcast
}STATUScurrentDESCRIPTION"A collection of objects for the broadcast address
configuration of interfaces."::={ ciscoIPIfMIBGroups 2}ciscoIPIfAddressConfigurationGroup3 OBJECT-GROUPOBJECTS{
ciiIPAddressCategoryCap,
ciiIPIfAddressPrefixLength,
ciiIPIfAddressCategory,
ciiIPIfAddressStatus
}STATUScurrent
DESCRIPTION"A collection of objects for the address configuration
of interfaces."::={ ciscoIPIfMIBGroups 3}ciscoIPIfAddressConfigurationGroup4 OBJECT-GROUPOBJECTS{
ciiIPIfAddressBroadcast
}STATUScurrentDESCRIPTION"A collection of objects for the broadcast address
configuration of interfaces."::={ ciscoIPIfMIBGroups 4}END